The JVC Everio is a digital camcorder with a rechargeable bn vf707u battery pack that attaches to the back of the unit. The Everio battery supplied with the camcorder delivers an average one hour and 20 minutes of power on a full charge, according to the camcorder instruction manual. Battery upgrades with longer run times are also available for the Everio. Standard recharging of the original battery that comes with the Everio takes about two hours and 40 minutes, according to JVC. All equipment for recharging the battery comes with the camcorder.
Instructions-
- 1 Turn off the Everio by twisting the power knob clockwise while pressing the unlock button on the edge of the knob.
- 2 Slide the bn vf733u battery pack straight down onto the back of the Everio until the battery pack clicks in the locked position.
- 3 Insert the AC power adapter into the port on the back of the Everio in the lower right corner.
- 4 Plug the other end of the adapter into an electrical outlet. The LED charging light illuminates. The battery is fully charged when the LED light turns off.
How to Charge a JVC Everio HDD
JVC Everio HDD (hard disk drive) camcorders provide the ability to record high-quality video and audio, with the added benefit of allowing 100 hours or more of recording time (depending on the particular model and recording mode) without the use of multiple cassettes, DVDs or flash memory cards, which are required by many other types of cameras. JVC Everio HDD camcorders can be powered either by connecting the unit directly to the AC adapter or by attaching and charging its accompanying battery.
Instructions
Things You'll Need
- jvc bn v11u battery and charging cable / AC adapter
-
- 1 Close the LCD display monitor (if it is open) to turn off the camcorder. The accompanying battery (or a replacement) does not come with a full charge upon purchase, so charging is required before use.
- 2 Attach the battery pack to the rear of the camera by sliding it upward into the locked position, with the arrow indicator on the battery pointing up.
- 3 Connect the AC adapter plug to its port above the battery pack and plug the adapter into a nearby AC outlet. The power/charge lamp will blink to indicate that charging is in progress; it will go out when the battery is fully charged.
- 4 Press the "Info" button twice at any time when the camera is powered on and in camera mode to view the remaining battery life -- which is displayed in ten minute units -- on the LCD display screen; alternatively, press the "Info" button once and select the jvc bn v408u battery icon.
- 1
- 1
